Skip to content

Cisco Automation Testing Interview Questions & Answers

Curated interview practice questions with answers. These are practice scenarios, not a verified list of past interview questions.

About Cisco hiring for Automation Testing roles

Cisco is a networking and security company making routers, switches, security products, collaboration tools such as Webex, and observability software including Splunk. Its Bengaluru campus is one of its largest R&D centres outside the US. It hires in India for software engineers, test and validation engineers, network engineers and data analysts.

For Automation Testing roles, this Cisco practice set focuses most on API Testing and CI/CD (6), TestNG Framework (5), Selenium Grid & Docker (5), Core Java for Testers (4). It has 4 easy, 26 medium, 10 hard questions, so you can start easy and work up to the harder ones.

Company type
Hardware & semiconductors
Headquarters
San Jose, California, USA
Main India offices
Bengaluru, Pune, Chennai

Cisco Automation Testing interview process

  1. Online assessment (aptitude + networking + coding)
  2. Technical round 1
  3. Technical round 2
  4. Managerial round
  5. HR round

Typical pattern based on public candidate experiences. Rounds vary by role, team and year.

Solved for CiscoStart practicing
3 QUESTIONS FREESign up to unlock the full question bank and track your progress.Unlock every question and answer, then continue practising company-wise and package-wise.
3 questions free Unlock the rest in seconds
01

What are try-with-resources and why use them?

Save to ▾
Show answer
A try block that automatically closes resources such as file readers or streams, preventing leaks without a finally block.
02

How does HashMap work internally?

Save to ▾
Show answer
It uses the key's hashCode to find a bucket and equals to resolve collisions, giving O(1) average lookups; Java 8 converts long buckets into trees.
03

How do you measure and assert API response time in REST Assured?

Save to ▾
Show answer
Use then().time(lessThan(2000L)) for a quick check or response.getTimeIn(TimeUnit.MILLISECONDS) to log the value. This measures client-side time, including network, so set generous thresholds and treat it as a smoke signal, not a performance test. For real load and latency percentiles, use tools such as JMeter, Gatling or k6.
04

Mobile tests pass on the emulator but fail on a low-end real device. How do you investigate?

Save to ▾
Show answer
Low-end devices are slower, so fixed waits and short timeouts expire before screens render. Replace sleeps with explicit waits and increase timeouts sensibly. Check for vendor-specific pop-ups, battery optimisation dialogs or different keyboards on that brand. Compare screen size and resolution, since coordinate-based taps break. Collect device logs with adb logcat and screen recordings to see what the app was doing. Also check whether the app crashed due to low memory.
05

What is Postman and how do you automate with it?

Save to ▾
Show answer
An API client. Add tests in JavaScript, use environments and collections, and run them with Newman in a CI pipeline.
06

What is a webhook and how do you test it?

Save to ▾
Show answer
A callback where one system sends an HTTP request to another when an event occurs. Test with a mock receiver or tools such as webhook.site and verify the payload.
07

Why is XPath slow in Appium and what should you use instead?

Save to ▾
Show answer
For every XPath query Appium must fetch the full page source of the app, convert it into an XML document and then evaluate the expression, which can take seconds on large screens and is even slower on iOS. Index-based XPath also breaks when layouts change. Use accessibility id first, then resource-id, Android UiAutomator selectors or iOS predicate strings and class chains, which are evaluated natively on the device and are much faster.
08

Your test framework leaks memory during long runs and Jenkins agents crash. How do you investigate?

Save to ▾
Show answer
Check whether drivers are always quit, ThreadLocal values are removed, and static lists or maps keep growing, such as collecting screenshots or response objects. Enable heap dumps with -XX:+HeapDumpOnOutOfMemoryError and analyse with a tool like VisualVM or Eclipse MAT to see which objects hold memory. Fix the leak and tune Surefire's forked JVM memory with argLine if needed.
09

How do you verify that the correct page has loaded in POM?

Save to ▾
Show answer
Give each page an isAt() or waitUntilLoaded() method that waits for a unique element, page title or URL fragment. Call it in the constructor or right after navigation. If it fails, throw a clear error such as "Expected Cart page but URL was /login". This catches navigation problems at the right point instead of failing later with a confusing locator error.
10

How do you attach a screenshot to the Cucumber report when a scenario fails?

Save to ▾
Show answer
@After public void afterScenario(Scenario scenario) { if (scenario.isFailed()) { byte[] shot = ((TakesScreenshot) driver) .getScreenshotAs(OutputType.BYTES); scenario.attach(shot, "image/png", scenario.getName()); } driver.quit(); }
11

How would you test an API with rate limiting?

Save to ▾
Show answer
Read the documented limit, then send requests quickly until you exceed it and assert a 429 Too Many Requests response with headers like Retry-After or remaining quota. Wait for the window to reset and confirm requests succeed again. Also check limits are per user or key as designed. Run these tests in isolation so they do not throttle the rest of the suite.
12

Write a JSR223 Groovy PostProcessor that reads a JSON response and stores a value as a JMeter variable.

Save to ▾
Show answer
// JSR223 PostProcessor, language: groovy import groovy.json.JsonSlurper def body = prev.getResponseDataAsString() def json = new JsonSlurper().parseText(body) if (json?.orderId) { vars.put('orderId', json.orderId.toString()) } else { prev.setSuccessful(false) prev.setResponseMessage('orderId missing in response') }
13

Tests pass on QA but fail in the staging pipeline. How do you investigate?

Save to ▾
Show answer
Compare what differs: configuration URLs, test data, feature flags, user permissions, network or proxy, browser versions and timing due to slower servers. Check logs and screenshots from staging and rerun one failing test with verbose logging. Often the issue is missing data or a flag. Fix by making environment settings explicit and creating required data in test setup.
14

What is the timeOut attribute in TestNG?

Save to ▾
Show answer
@Test(timeOut = 5000) fails the test if it runs longer than 5000 milliseconds. It can also be set at suite or test level in testng.xml. It protects pipelines from hanging tests, for example a stuck network call. It is not a performance test; use reasonable limits so slow but correct environments do not cause false failures.
15

How would you automate a login flow with multiple user roles?

Save to ▾
Show answer
Keep credentials in external data, parameterise the test with a data provider, reuse a login method in a page class, and clear sessions between roles.
16

How do you test an application that requires login on every test without slowing the suite?

Save to ▾
Show answer
Log in once through the API, capture the session cookie or token, and inject it into the browser with driver.manage().addCookie() after opening the domain, or set local storage with JavaScript. Then navigate directly to the page under test. Keep one real UI login test to cover the login page itself. This often saves several seconds per test.
17

What is IAnnotationTransformer in TestNG?

Save to ▾
Show answer
IAnnotationTransformer is a listener that changes @Test annotations at runtime before tests run. A common use is attaching a retry analyzer to every test automatically instead of adding retryAnalyzer to each method, or enabling and disabling tests from configuration. It must be registered in testng.xml or via service loader, not with the @Listeners annotation.
18

How do you test GraphQL APIs compared with REST?

Save to ▾
Show answer
GraphQL usually has one endpoint and you send a POST with a query and variables. Tests check the data returned matches the requested fields, that errors appear in the errors array, often with status 200, and that authorization applies per field. Also test query depth limits and nested queries for performance. REST Assured works fine by sending the query as JSON body.
19

How do you start a standalone Chrome container and run your tests against it?

Save to ▾
Show answer
Run docker run -d -p 4444:4444 -p 7900:7900 --shm-size=2g selenium/standalone-chrome:latest, preferably with a pinned version tag instead of latest. It starts a mini Grid with one Chrome node. Point RemoteWebDriver to http://localhost:4444 with ChromeOptions and the tests run inside the container. Port 7900 lets you watch through noVNC. Stop it with docker stop when finished, or use --rm so it is removed automatically.
20

Write a REST Assured test using RequestSpecBuilder and ResponseSpecBuilder.

Save to ▾
Show answer
RequestSpecification req = new RequestSpecBuilder() .setBaseUri(Config.baseUrl()) .setContentType(ContentType.JSON) .addHeader("Authorization", "Bearer " + token) .build(); ResponseSpecification ok = new ResponseSpecBuilder() .expectStatusCode(200) .expectContentType(ContentType.JSON) .build(); given().spec(req).when().get("/orders").then().spec(ok);
21

How do you upload a file with Selenium?

Save to ▾
Show answer
If the element is <input type="file">, use element.sendKeys("C:/path/file.pdf"). Use the Robot class or AutoIt only as a last resort for OS dialogs.
22

How do you share state between step definition classes in Cucumber Java?

Save to ▾
Show answer
Use dependency injection. With cucumber-picocontainer (or Spring/Guice), create a context class such as TestContext holding the driver, page objects and scenario data, and add it as a constructor parameter in every step class. Cucumber creates one instance per scenario and injects the same object everywhere, so state is shared within a scenario but never leaks between scenarios. Avoid static fields because they break parallel runs.
23

Half of your TestNG tests are skipped in CI with no failure shown. What could cause it?

Save to ▾
Show answer
Usually a configuration method failed, such as @BeforeClass or @BeforeSuite throwing an exception, which makes TestNG skip dependent tests. Other causes are dependsOnMethods on a failed test, a group filter excluding setup methods without alwaysRun, or a DataProvider that threw an exception. Check the configuration failures section of the report and the log for the first exception.
24

What is the difference between hard and soft assertions?

Save to ▾
Show answer
Hard assert stops the test at the first failure; SoftAssert collects failures and reports them together when assertAll() is called.
25

How do you retry failed tests in TestNG?

Save to ▾
Show answer
Implement IRetryAnalyzer with a retry count and attach it through the test annotation or a listener to rerun flaky tests.
26

How do you create a custom parameter type in Cucumber?

Save to ▾
Show answer
Annotate a method with @ParameterType, giving a regex and returning a domain object. For example @ParameterType("admin|manager|viewer") public Role role(String name) { return Role.valueOf(name.toUpperCase()); } lets you write steps like "I log in as {role}". It keeps conversion logic in one place, makes steps type-safe and gives clearer errors when an invalid value is used.
27

How does Selenium Grid decide which node gets a new session?

Save to ▾
Show answer
Each node advertises slots with stereotypes, which are capability sets like browserName chrome, a browser version and platformName linux. The distributor compares the requested capabilities with those stereotypes and picks a free matching slot, preferring nodes with lower load. If nothing matches, the request stays in the queue until timeout. Custom capabilities in the stereotype let you route tests to special nodes, such as nodes with a particular extension.
28

Write a declarative Jenkinsfile that runs Maven tests and publishes results.

Save to ▾
Show answer
pipeline { agent any parameters { choice(name: 'SUITE', choices: ['smoke', 'regression']) } stages { stage('Checkout') { steps { checkout scm } } stage('Test') { steps { sh "mvn clean test -DsuiteXml=${params.SUITE}.xml" } } } post { always { junit 'target/surefire-reports/*.xml' archiveArtifacts artifacts: 'target/screenshots/**', allowEmptyArchive: true } } }
29

What is correlation in JMeter and why is it needed?

Save to ▾
Show answer
Correlation means capturing dynamic values from one response and passing them into later requests. Session ids, CSRF tokens, auth tokens and order ids change every run, so a recorded script with hard-coded values fails on replay. In JMeter you use post-processors such as JSON Extractor, Regular Expression Extractor or CSS Selector Extractor to save the value into a variable, then reference it as ${token} in later headers or bodies.
30

Why do Selenium browser containers need a larger shm_size?

Save to ▾
Show answer
Chrome and Firefox use shared memory at /dev/shm for rendering and inter-process communication. Docker gives containers only 64 MB of shared memory by default, which is not enough for modern pages, so the browser tab crashes with errors like session deleted because of page crash. Setting shm_size to 2g in Compose, or --shm-size=2g with docker run, fixes it. Mounting /dev/shm from the host is an alternative.
31

What is a Jenkins pipeline?

Save to ▾
Show answer
A scripted or declarative Jenkinsfile that defines stages such as build, test and deploy as code stored with the project.
32

How do you test deep links in a mobile app with Appium?

Save to ▾
Show answer
On Android use the mobile: deepLink command with the URL and package, for example driver.executeScript("mobile: deepLink", Map.of("url", "shop://product/42", "package", "com.example.shop")). On iOS simulators driver.get with the custom URL opens it, though Safari may show a confirm dialog to handle. Then assert that the correct screen and data are shown. Deep links are also a great shortcut to reach deep screens quickly in other tests.
33

How do you extract an auth token with JSON Extractor and use it in later JMeter requests?

Save to ▾
Show answer
Add a JSON Extractor as a child of the login sampler. Set the variable name to token, the JSON path expression to $.access_token, match number 1 and a default like TOKEN_NOT_FOUND so failures are visible. Then add an HTTP Header Manager at Thread Group level with Authorization set to Bearer ${token}. Each thread extracts and uses its own token, because JMeter variables are per thread.
34

What is the Maven Surefire plugin and how do you configure it for TestNG?

Save to ▾
Show answer
Surefire runs tests during the test phase. For TestNG, configure suiteXmlFiles with the path to testng.xml, so mvn test runs that suite. You can pass system properties, set parallel and threadCount, and control reports. Make the suite file a property like ${suiteXml} so CI can choose smoke.xml or regression.xml with -DsuiteXml=smoke.xml.
35

What is a Maven multi-module project and when would you use it for automation?

Save to ▾
Show answer
A parent pom lists modules that share dependency versions through dependencyManagement and plugins through pluginManagement. In automation you might have core-framework, ui-tests, api-tests and performance modules. Teams can run or release modules separately, and shared code lives in one place. It is worth it when several teams or test types share the same framework.
36

Your recorded JMeter script fails with 403 on every request after login. What is the likely cause?

Save to ▾
Show answer
The script is probably replaying hard-coded dynamic values, such as a CSRF token, session cookie or auth header captured during recording. The server rejects them because they belong to the old session. Add an HTTP Cookie Manager so cookies are handled per thread, extract the CSRF or bearer token from the login response with an extractor, and replace the recorded value with the variable. Verify with View Results Tree on one thread.
37

You configured 50 parallel threads but only 8 tests run at a time on the Grid. Why?

Save to ▾
Show answer
The Grid only has 8 free slots, so the other requests wait in the New Session Queue. Total parallelism equals nodes multiplied by max sessions per node, not the TestNG thread count. Check the Grid UI for slot count. To run more, scale the node containers, raise max sessions if hardware allows, or use a larger grid. Otherwise reduce threads to match slots so waiting requests do not time out.
38

What is CI/CD and why does automation need it?

Save to ▾
Show answer
Continuous Integration builds and tests every commit, and Continuous Delivery ships automatically. Automated tests give fast feedback and gate releases.
39

Chrome inside a Docker node keeps crashing with session deleted because of page crash. How do you fix it?

Save to ▾
Show answer
This is almost always shared memory exhaustion, because Docker's default /dev/shm of 64 MB is too small for Chrome. Set shm_size: 2gb in Compose or --shm-size=2g in docker run. Also check the container's memory limit and the number of sessions per node, since several browsers in one container multiply memory use. Heavy pages or memory leaks in long sessions can also crash tabs, so restart sessions between test classes.
40

What is the difference between Comparable and Comparator in Java?

Save to ▾
Show answer
Comparable defines the natural order inside the class (compareTo); Comparator defines custom orders externally (compare), useful for sorting test data in several ways.

Tips to crack the Cisco Automation Testing interview

  • Revise computer networking deeply, including OSI layers, TCP/IP, subnetting, routing protocols and VLANs.
  • For test roles, be ready to explain how you would test a network feature, including traffic tools and automation with Python.
  • Read about Cisco's security and Splunk observability products, which have become a growing focus area.
  • Keep a one-minute story ready for every project on your CV: problem, your part, tools, result.
  • Practise the hard questions on this page aloud; Cisco interviewers usually ask follow-ups on your first answer.

Frequently asked questions

How many rounds are there in the Cisco Automation Testing interview?

Candidates usually go through 5 stages: Online assessment (aptitude + networking + coding); Technical round 1; Technical round 2; Managerial round; HR round. The exact rounds change with the role, team, location and your experience, so confirm the process with the recruiter.

Which topics should I prepare for the Cisco Automation Testing interview?

This practice set leans on API Testing and CI/CD (6), TestNG Framework (5), Selenium Grid & Docker (5), Core Java for Testers (4). Revise those first, then practise explaining one or two of your own projects end to end, because most Cisco interviewers ask you to walk through real work.

Are these the exact questions asked at Cisco?

No. These are curated practice questions that match the skills and difficulty usually tested in hardware & semiconductors interviews like Cisco's. They are not a leaked or verified list of past questions.

Where does Cisco hire Automation Testing professionals in India?

Cisco has large teams in Bengaluru, Pune, Chennai. Openings and locations change often, so check the Cisco careers page and filter by city and experience.

Automation Testing questions for similar companies