Data Structures and Algorithms Interview Questions in Pune

Show answer

The diameter is the number of edges on the longest path between any two nodes, which may not pass through the root. Compute it in one postorder traversal: for each node, get the heights of the left and right subtrees, update a global best with left plus right, and return 1 plus the larger height to the parent. This visits each node once, giving O(n) time instead of O(n squared) from recomputing heights.

Find the next greater element for every element of an array.

Show answer

def next_greater(nums): res = [-1] * len(nums) stack = [] # indices with decreasing values for i, x in enumerate(nums): while stack and nums[stack[-1]] < x: res[stack.pop()] = x stack.append(i) return res # [4, 5, 2, 25] -> [5, 25, 25, -1] # Each index is pushed and popped once: O(n)

What are the trade-offs between recursion and iteration?

Show answer

Recursion expresses tree traversal, divide and conquer and backtracking naturally and with less code. However each call uses stack memory and has call overhead, and deep recursion can overflow the stack, about 1000 frames by default in Python. Iteration with an explicit stack or loop uses heap memory and is usually faster. Many interviewers accept recursive solutions but may ask for an iterative version for very deep inputs.

What is a dummy or sentinel node and why is it useful in linked list problems?

Show answer

A dummy node is an extra node placed before the real head. It removes special cases for operations that may change the head, such as deleting the first element, merging lists or inserting at the start. You build the result after dummy and return dummy.next at the end. This leads to shorter, less error-prone code, which matters a lot when writing linked list solutions under interview pressure.

How can you reduce the space used by a DP solution?

Show answer

If each row of the table depends only on the previous row, keep two rows or even a single array, reducing O(n times m) space to O(m). Fibonacci-like problems need only the last two values, so O(1). For 0/1 knapsack in one array, iterate capacity from high to low so each item is used once; for unbounded knapsack iterate low to high. The trade-off is that reconstructing the actual solution becomes harder.

Tell me about a time you explained a technical idea to a non-technical person.

Show answer

Situation: a product manager asked why a search feature became slow as data grew. Task: explain the cause and the fix without jargon. Action: I compared the current approach to checking every book in a library one by one and the fix to using the catalogue index, then showed a simple chart of response times before and after a prototype. Result: the manager approved two sprints for the change and later reused my analogy with clients.

Count the number of islands in a grid of 1s and 0s.

Graphs and Graph AlgorithmsEasy

Show answer

// Java static int numIslands(char[][] g) { int count = 0; for (int r = 0; r < g.length; r++) for (int c = 0; c < g[0].length; c++) if (g[r][c] == '1') { count++; sink(g, r, c); } return count; } static void sink(char[][] g, int r, int c) { if (r < 0 || c < 0 || r >= g.length || c >= g[0].length || g[r][c] != '1') return; g[r][c] = '0'; // mark visited sink(g, r + 1, c); sink(g, r - 1, c); sink(g, r, c + 1); sink(g, r, c - 1); } // O(rows * cols) time

Detect whether a linked list has a cycle and return the node where the cycle begins.

Show answer

def detect_cycle(head): slow = fast = head while fast and fast.next: slow = slow.next fast = fast.next.next if slow is fast: # cycle found slow = head while slow is not fast: # move both one step slow = slow.next fast = fast.next return slow # start of the cycle return None # O(n) time, O(1) space

What is recursion and why is a base case essential?

Complexity Analysis and RecursionEasy

Show answer

Recursion is when a function solves a problem by calling itself on smaller subproblems. Each call gets its own frame on the call stack holding parameters and local variables. The base case is the condition where the function returns directly without recursing, such as n equal to 0 for factorial. Without a correct base case, calls never stop and the program fails with a stack overflow.

Tell me about a time you received critical feedback on your code.

Linked Lists, Stacks and QueuesHard

Show answer

Situation: a senior reviewer rejected my pull request because my queue processing code was O(n squared) and had no tests. Task: fix it and learn from it. Action: I asked for a short walkthrough, replaced repeated list removals with a deque, added unit tests for edge cases and asked for a second review. Result: the change merged with a ten times speed-up, and I now self-review complexity and tests before raising any pull request.

Compute the length of the longest common subsequence of two strings.

Show answer

// Java static int lcs(String a, String b) { int m = a.length(), n = b.length(); int[][] dp = new int[m + 1][n + 1]; for (int i = 1; i <= m; i++) { for (int j = 1; j <= n; j++) { if (a.charAt(i - 1) == b.charAt(j - 1)) dp[i][j] = dp[i - 1][j - 1] + 1; else dp[i][j] = Math.max(dp[i - 1][j], dp[i][j - 1]); } } return dp[m][n]; } // lcs(abcde, ace) = 3; O(m * n) time and space

Implement topological sort using Kahn's algorithm.

Show answer

from collections import deque def topo_sort(n, edges): adj = [[] for _ in range(n)] indeg = [0] * n for u, v in edges: # u must come before v adj[u].append(v) indeg[v] += 1 q = deque(i for i in range(n) if indeg[i] == 0) order = [] while q: u = q.popleft() order.append(u) for v in adj[u]: indeg[v] -= 1 if indeg[v] == 0: q.append(v) return order if len(order) == n else [] # empty means a cycle exists

Find the length of the longest substring without repeating characters.

Arrays, Strings and HashingMedium

Show answer

def length_of_longest_substring(s): last = {} # char -> last index seen left = best = 0 for right, ch in enumerate(s): if ch in last and last[ch] >= left: left = last[ch] + 1 last[ch] = right best = max(best, right - left + 1) return best # 'abcabcbb' -> 3, 'bbbbb' -> 1, 'pwwkew' -> 3; O(n) time

How would you generate friend suggestions as friends of friends in a social network?

Show answer

Run a BFS limited to depth 2 from the user. For every friend, look at their friends, skip the user and existing friends, and count how many mutual friends each candidate has using a hash map. Rank candidates by mutual friend count and other signals. For users with thousands of friends this gets expensive, so production systems precompute suggestions offline in batch jobs and cache them.

Tell me about an interview or exam you failed and what you learned.

Show answer

Situation: I was rejected after a coding round because I could not solve a tree problem in time. Task: understand the gap honestly. Action: I wrote down the question, realised I memorised solutions instead of patterns, and reorganised my practice by patterns such as postorder aggregation and BFS by level, explaining each solution aloud. Result: three months later I cleared a similar round comfortably, and I now review every mistake within a day.

How does Dijkstra's algorithm work and why does it fail with negative edge weights?

Show answer

Dijkstra keeps a min-heap of tentative distances. It repeatedly pops the closest unvisited vertex, marks its distance final and relaxes its outgoing edges, giving O((V plus E) log V). It relies on the fact that once a vertex is popped, no shorter path can appear later. A negative edge breaks that assumption because a longer path could later become cheaper. For negative weights use Bellman-Ford.

An array of size 100000 must answer 100000 queries asking for the sum between two indices. What approach would you use?

Arrays, Strings and HashingMedium

Show answer

Recomputing each sum is O(n) per query, about 10 to the power 10 operations in total, which is too slow. Since the array does not change, I would build a prefix sum array once in O(n) and answer each query in O(1) as pre[r+1] minus pre[l], giving O(n plus q) overall. If the array also receives updates, I would switch to a Fenwick tree or segment tree for O(log n) updates and queries.

What is Kadane's algorithm?

Arrays, Strings and HashingMedium

Show answer

Kadane's algorithm finds the maximum sum contiguous subarray in O(n) time and O(1) space. At each element it decides whether to extend the current subarray or start fresh: current = max(x, current + x), and best = max(best, current). The insight is that a negative running sum never helps a future subarray. For an all-negative array it correctly returns the largest single element when initialised with the first value.

Find the minimum number of coins needed to make an amount.

Show answer

def coin_change(coins, amount): INF = amount + 1 dp = [0] + [INF] * amount # dp[x] = min coins for amount x for x in range(1, amount + 1): for c in coins: if c <= x and dp[x - c] + 1 < dp[x]: dp[x] = dp[x - c] + 1 return dp[amount] if dp[amount] != INF else -1 # coin_change([1, 3, 4], 6) -> 2 (3 + 3) # O(amount * len(coins)) time, O(amount) space

What is the difference between a subarray, a subsequence and a substring?

Arrays, Strings and HashingEasy

Show answer

A subarray is a contiguous part of an array, and an array of n elements has n times n plus 1 over 2 of them. A substring is the same idea for strings. A subsequence keeps the original order but may skip elements, so there are 2 to the power n of them. This matters for choosing techniques: sliding window and prefix sums suit subarrays, while subsequence problems often need dynamic programming.

How does binary search work and what does it require?

Sorting, Searching and BacktrackingEasy

Show answer

Binary search works on sorted data or any monotonic condition. Compare the middle element with the target; if equal, return it, if the target is smaller search the left half, otherwise the right half. Each step halves the search space, giving O(log n) time, so a million elements need about 20 comparisons. It requires random access, so it suits arrays but not linked lists.

A sorted array has been rotated at an unknown point. How can you still search it in O(log n)?

Sorting, Searching and BacktrackingMedium

Show answer

At every step of binary search, at least one half around mid is sorted. Compare nums[low] with nums[mid]: if the left half is sorted and the target lies within its range, search left, otherwise search right. If the right half is sorted, apply the same check on the right. This keeps O(log n). With duplicates allowed, equal values can hide which half is sorted, and the worst case becomes O(n).

What is tail recursion and do Java and Python optimise it?

Show answer

A call is tail recursive when the recursive call is the very last action, so nothing remains to be done after it returns, as in a factorial that carries an accumulator. Some languages reuse the same stack frame for such calls, turning recursion into a loop. Neither Java nor CPython performs tail call optimisation, so deep tail recursion still overflows; convert it to a loop manually.

How can two heaps maintain the running median of a stream?

Heaps, Priority Queues and GreedyMedium

Show answer

Keep a max-heap for the smaller half of the numbers and a min-heap for the larger half, balanced so their sizes differ by at most one. Insert each number into the correct heap, then move the top element across if sizes become unbalanced. The median is the top of the larger heap, or the average of both tops when sizes are equal. Insertion is O(log n) and finding the median is O(1).

Write a function to validate a binary search tree.

Show answer

def is_valid_bst(root, low=float('-inf'), high=float('inf')): if not root: return True if not (low < root.val < high): return False return (is_valid_bst(root.left, low, root.val) and is_valid_bst(root.right, root.val, high)) # Passing bounds checks the whole-subtree property, not just children. # O(n) time, O(h) space.

Compare AVL trees and red-black trees.

Show answer

Both are self-balancing BSTs with O(log n) operations. AVL trees keep the heights of sibling subtrees within one, so they are more strictly balanced and give faster lookups, but need more rotations on insert and delete. Red-black trees allow looser balance using node colours, so updates are cheaper. That is why Java TreeMap and C++ std::map use red-black trees, while AVL suits read-heavy workloads.

What does binary search on the answer mean?

Sorting, Searching and BacktrackingHard

Show answer

Instead of searching an array, you binary search over possible answers when there is a monotonic feasibility check: if capacity X works, any larger capacity also works. Examples include minimum ship capacity to deliver within D days, minimum eating speed, or the largest minimum distance between placed items. Each check is often O(n) greedy, so total time is O(n log of the answer range), which is very efficient.

Two linked lists merge at some node and share the rest. How do you find the merge point efficiently?

Linked Lists, Stacks and QueuesHard

Show answer

A hash set of the first list's nodes works in O(m plus n) time but uses O(m) space. The O(1) space trick uses two pointers: walk each list, and when a pointer reaches the end, redirect it to the head of the other list. Both pointers travel m plus n steps, so they meet at the intersection, or both become null if there is none. Comparing node references, not values, is essential.

What is a bipartite graph and how do you check for one?

Show answer

A graph is bipartite if its vertices can be split into two groups so every edge connects vertices from different groups, which is equivalent to having no odd-length cycle. To check, colour vertices with BFS or DFS: give the start vertex colour 0, its neighbours colour 1 and so on; if any edge connects two vertices of the same colour, it is not bipartite. Run it on each component, O(V plus E).

Tell me about a time you worked with people from other teams to solve a complex problem.

Show answer

Situation: delivery route suggestions in our app were slow and the data team blamed the backend while we blamed the data. Task: find the real issue. Action: I set up a joint session, we traced one slow request end to end and found the graph was rebuilt from raw tables on every call. I proposed caching the adjacency lists, and the data team added change notifications. Result: response time dropped from 3 seconds to 200 milliseconds.

How do you recognise a DP problem and define its state?

Show answer

Signals include asking for a minimum, maximum, count of ways or whether something is possible, with choices at each step that affect later options. Start from brute-force recursion and ask what parameters fully describe a subproblem, such as index, remaining capacity or last chosen item; those become the state. Then write the transition between states, the base cases and the order of computation, and check the state count times transition cost fits limits.

An interviewer asks you to reduce your solution's extra space from O(n) to O(1). How do you approach it?

Show answer

I check what the extra structure stores and whether the input itself can hold that information. Common techniques: use two pointers instead of a hash set on sorted data, keep only the last few DP values instead of a full table, modify the input in place, such as marking visited indices by negating values, or use bit manipulation like XOR to find a missing number. I state any trade-offs, such as mutating input.

How would you implement browser back and forward navigation?

Linked Lists, Stacks and QueuesEasy

Show answer

Use two stacks plus the current page. Visiting a new page pushes the current page onto the back stack, sets the new page as current and clears the forward stack. Back pushes current onto the forward stack and pops the back stack into current. Forward does the reverse. Each operation is O(1). A doubly linked list with a cursor is an alternative that makes it easy to show the full history.

Explain best, average and worst case complexity using quicksort.

Show answer

Best case is the minimum work over inputs of size n, worst case the maximum and average case the expected work over typical inputs. Quicksort averages O(n log n) because random pivots split arrays reasonably evenly. Its worst case is O(n squared) when the pivot is always the smallest or largest element, such as sorted input with a first-element pivot. Random pivots or median-of-three make the worst case very unlikely.

Solve climbing stairs: how many ways are there to climb n steps taking 1 or 2 steps at a time?

Dynamic ProgrammingEasy

Show answer

def climb_stairs(n): if n <= 2: return n prev2, prev1 = 1, 2 # ways(1), ways(2) for _ in range(3, n + 1): prev2, prev1 = prev1, prev1 + prev2 return prev1 # ways(n) = ways(n-1) + ways(n-2): a Fibonacci pattern # climb_stairs(5) -> 8; O(n) time, O(1) space

You are building undo and redo for a text editor. Which data structures would you use?