Curated interview practice questions with answers. These are practice scenarios, not a verified list of past interview questions.
About IBM hiring for CCNA roles
IBM is a global technology company offering hybrid cloud, AI through watsonx, software such as Red Hat, infrastructure and IBM Consulting services. Its India Software Labs and IBM Consulting teams form one of its largest workforces outside the US. It hires in India for software developers, test engineers, data engineers, data scientists and consultants.
For CCNA roles, this IBM practice set focuses most on IP Addressing and Subnetting (7), Switching and VLANs (5), STP and EtherChannel (5), Routing and OSPF (4). It has 12 easy, 17 medium, 1 hard questions, so you can start easy and work up to the harder ones.
Company type
IT services
Headquarters
Armonk, New York, USA
Main India offices
Bengaluru, Pune, Hyderabad, Kolkata, Gurugram
IBM CCNA interview process
Online assessment (cognitive games + coding)
English language test
Technical interview
Managerial or HR round
Typical pattern based on public candidate experiences. Rounds vary by role, team and year.
Solved for IBMStart practicing
3 QUESTIONS FREESign up to unlock the full question bank and track your progress.Unlock every question and answer, then continue practising company-wise and package-wise.
✓ 3 questions free • Unlock the rest in seconds
01
What are the default administrative distances you should know?
Connected 0, static 1, EIGRP summary 5, eBGP 20, internal EIGRP 90, OSPF 110, IS-IS 115, RIP 120, external EIGRP 170 and iBGP 200. A value of 255 means the route is never used. AD compares trust between sources, so a static route with AD 1 beats OSPF for the same prefix unless you configure a floating static with a higher AD.
02
What are DR and BDR in OSPF and why are they needed?
On multi-access networks such as Ethernet, a full mesh of adjacencies would create too many LSAs. OSPF elects a Designated Router and Backup DR; other routers (DROTHERs) form full adjacency only with them and stay 2-Way with each other. The highest interface priority wins, then highest router ID; priority 0 means never DR. Election is non-preemptive, so a new better router does not take over.
03
What is the native VLAN and what problems can a mismatch cause?
The native VLAN is the VLAN whose frames cross a trunk untagged, VLAN 1 by default. Both ends must use the same native VLAN; if they differ, frames leak between VLANs and CDP logs a native VLAN mismatch. For security, set the native VLAN to an unused ID, do not put users in it, and optionally tag it with vlan dot1q tag native to prevent VLAN hopping.
A voice VLAN lets an IP phone and a PC share one switch port while keeping their traffic separate. The port is an access port in the data VLAN, and the switch tells the phone through CDP or LLDP-MED to tag voice frames with the voice VLAN. This allows QoS priority for voice and separate addressing. Configure it with switchport voice vlan.
05
What are the default STP path costs for common link speeds?
With short (802.1D revised) costs: 10 Mbps is 100, 100 Mbps is 19, 1 Gbps is 4 and 10 Gbps is 2. With the long pathcost method, 1 Gbps is 20000 and 10 Gbps is 2000, which distinguishes higher speeds. Root path cost is the sum of costs on ports toward the root, and the lowest total wins when choosing root ports.
06
A broadcast storm brought the network down after someone connected a cable between two wall ports. How do you prevent this?
Two wall ports patched to the same switch formed a loop. To stop it now, I find the port with rising broadcast counters and shut it. To prevent repeats, enable PortFast with BPDU Guard on all access ports, keep Rapid PVST+ running everywhere, add storm-control broadcast thresholds on access ports and enable errdisable recovery with a sensible interval.
802.1Q inserts a 4-byte tag after the source MAC in the Ethernet frame. The tag holds a 12-bit VLAN ID (1 to 4094 usable), 3 priority bits used by CoS for QoS, and a DEI bit. The tag is added when a frame leaves a trunk and removed at an access port. Older ISL encapsulation is obsolete; modern switches support only 802.1Q.
08
Explain the NAT terms inside local, inside global, outside local and outside global.
Inside local is the private address of an inside host, for example 192.168.1.10. Inside global is the public address that represents it outside, for example 203.0.113.5. Outside global is the real address of the remote host. Outside local is how the remote host appears to inside users, usually the same as outside global unless destination NAT is used. show ip nat translations displays these columns.
09
Explain root port, designated port and blocked port.
Every non-root switch picks one root port, its best path to the root based on lowest root path cost, then lowest sender bridge ID, then lowest sender port ID. On each segment, the switch with the best path becomes the designated port and forwards. Every remaining port becomes non-designated and blocks. All ports on the root bridge are designated.
When a host needs the MAC for an IP on its subnet, it broadcasts an ARP request and the owner replies with a unicast ARP reply; the result is cached. For remote destinations the host ARPs for its default gateway. A gratuitous ARP is an unsolicited announcement of a host's own IP-to-MAC mapping, used after failover, for example by HSRP, to update switch and host tables.
11
How do you verify VLANs, trunks and MAC learning on a switch?
These show commands cover most VLAN troubleshooting.
show vlan brief
show interfaces trunk
show interfaces Gi1/0/5 switchport
show mac address-table vlan 20
show mac address-table address 0050.56ab.cdef
show interfaces status
They show VLAN membership, allowed and active VLANs on trunks, native VLAN and where each MAC was learned.
12
How do you configure IPv4 and IPv6 on a router interface?
Enable IPv6 routing globally, then add both addresses to the interface.
ipv6 unicast-routing
interface GigabitEthernet0/0
ip address 192.168.1.1 255.255.255.0
ipv6 address 2001:db8:1:1::1/64
ipv6 address fe80::1 link-local
no shutdown
Verify with show ip interface brief and show ipv6 interface brief.
13
What are the IPv4 address classes and private ranges?
Class A is 1 to 126 with a default /8, Class B is 128 to 191 with /16, Class C is 192 to 223 with /24, Class D 224 to 239 is multicast and Class E is reserved. RFC 1918 private ranges are 10.0.0.0/8, 172.16.0.0/12 and 192.168.0.0/16. 127.0.0.0/8 is loopback and 169.254.0.0/16 is APIPA link-local. Today addressing is classless (CIDR).
14
A user complains the network is slow and the switch port shows many late collisions and CRC errors. What do you check?
Late collisions usually mean a duplex mismatch, and CRC errors point to bad cabling or interference. I would run show interfaces on the port to see duplex, speed and error counters, check the PC NIC settings, and set both sides to auto or hard-code both identically. Then I would replace the patch cable, clear counters and watch whether errors still increase.
Use one trunk link and a subinterface per VLAN with 802.1Q encapsulation.
interface GigabitEthernet0/0
no shutdown
interface GigabitEthernet0/0.10
encapsulation dot1Q 10
ip address 192.168.10.1 255.255.255.0
interface GigabitEthernet0/0.20
encapsulation dot1Q 20
ip address 192.168.20.1 255.255.255.0
The switch port facing the router must be a trunk.
Allow web traffic from one subnet to a server and block the rest of that subnet.
ip access-list extended WEB-ONLY
10 permit tcp 192.168.10.0 0.0.0.255 host 10.0.0.80 eq 443
20 deny ip 192.168.10.0 0.0.0.255 10.0.0.0 0.0.0.255
30 permit ip any any
interface vlan 10
ip access-group WEB-ONLY in
show access-lists WEB-ONLY
17
What is a wildcard mask and how is it used in ACLs?
A wildcard mask tells the router which bits must match: 0 means must match and 1 means ignore. It is often the inverse of the subnet mask, so 192.168.1.0 0.0.0.255 matches the whole /24. host 10.1.1.1 equals 0.0.0.0 and any equals 255.255.255.255. Wildcards are also used in OSPF network statements. Calculate it by subtracting the mask from 255.255.255.255.
18
How many usable hosts are in a /26 subnet and what is the block size?
A /26 leaves 6 host bits, so 2 to the power 6 is 64 addresses and 62 usable hosts after removing network and broadcast. The mask is 255.255.255.192 and the block size is 256 minus 192, which is 64. So subnets of 192.168.1.0/26 start at .0, .64, .128 and .192. For 192.168.1.70/26 the network is .64 and broadcast .127.
19
What are the first hop redundancy protocols and how does HSRP work?
FHRPs give hosts a virtual gateway IP shared by two or more routers. HSRP is proprietary: routers elect an active router by highest priority (default 100), and the standby takes over the virtual IP and MAC if hellos stop. Preempt lets a higher priority router reclaim the role. VRRP is the open standard, and GLBP adds load sharing across several routers.
20
How does a router choose the best route to a destination?
First it uses longest prefix match: the most specific matching prefix wins, so 10.1.1.0/24 beats 10.1.0.0/16. If the same prefix comes from different sources, the lowest administrative distance wins. If the same protocol offers several paths, the lowest metric wins, and equal metrics can be load-balanced with ECMP. Only the winners are installed in the routing table.
21
What is the difference between autonomous APs, controller-based APs and cloud-managed APs?
Autonomous APs are configured one by one and suit very small sites. Lightweight APs are managed by a Wireless LAN Controller using CAPWAP tunnels, which centralises configuration, RF management and roaming, and suits campuses. Cloud-managed APs are configured from a cloud dashboard, ideal for many branches. Split-MAC means real-time functions stay on the AP while management sits on the controller.
Make members routed ports first, then put the IP on the port-channel.
interface range TenGigabitEthernet1/1/1 - 2
no switchport
channel-group 10 mode active
interface Port-channel10
no switchport
ip address 10.0.0.1 255.255.255.252
show etherchannel 10 summary
show ip interface brief
23
How do you configure PortFast and BPDU Guard on access ports?
Apply per port or globally for all PortFast ports.
interface range GigabitEthernet1/0/1 - 46
switchport mode access
spanning-tree portfast
spanning-tree bpduguard enable
! or globally
spanning-tree portfast default
spanning-tree portfast bpduguard default
errdisable recovery cause bpduguard
errdisable recovery interval 300
Variable Length Subnet Masking means using different prefix lengths inside one address block, so each subnet is sized to its need. You allocate the largest subnets first, then smaller ones, to avoid overlaps. For example, from 10.1.1.0/24 you could give a 100-user LAN a /25, a 50-user LAN a /26, and point-to-point WAN links /30 or /31. It saves address space compared with fixed-length subnetting.
25
What are the basic steps to configure a WLAN with WPA2 or WPA3 on a controller GUI?
Steps on a typical WLC GUI: create a dynamic interface with VLAN, IP and DHCP server; go to WLANs and create a new WLAN with profile name and SSID; map it to the dynamic interface; under Security choose WPA2 or WPA3 with PSK or 802.1X and add the RADIUS server for enterprise; set QoS profile; enable the WLAN and apply it to AP groups.
26
What are the key elements of a security program for a network?
A security program combines user awareness training, physical access control, and technical controls such as strong authentication, firewalls, IPS, VPNs and patching. It is built around the CIA triad: confidentiality, integrity and availability. Policies define what is allowed, and logging and monitoring detect problems. CCNA focuses on device hardening, ACLs, Layer 2 security, AAA, VPNs and wireless security.
27
What is SLAAC and how is it different from DHCPv6?
With SLAAC a host learns the /64 prefix from a router advertisement and builds its own interface ID, without a server. Stateless DHCPv6 adds extra options such as DNS while the address still comes from SLAAC. Stateful DHCPv6 assigns the address itself and keeps bindings, similar to DHCPv4. RA flags M (managed) and O (other config) tell hosts which method to use.
From bottom to top: Physical, Data Link, Network, Transport, Session, Presentation and Application. Each layer serves the one above it. For example, Ethernet frames work at Layer 2, IP packets at Layer 3 and TCP segments at Layer 4. Engineers use the model to troubleshoot bottom-up: check cables and link lights first, then MAC learning, then IP reachability.
RFC 3021 allows /31 on point-to-point links because there is no need for network and broadcast addresses when only two devices exist. A /31 gives exactly two usable addresses, saving half the space of a /30. It is common on ISP and data center fabric links. Both ends must support it; on IOS you simply configure ip address 10.0.0.0 255.255.255.254.
802.11n (Wi-Fi 4) works on 2.4 and 5 GHz with MIMO. 802.11ac (Wi-Fi 5) is 5 GHz only with wider channels and MU-MIMO downlink. 802.11ax (Wi-Fi 6 and 6E) adds OFDMA, BSS colouring and target wake time, and 6E adds the 6 GHz band. 802.11be (Wi-Fi 7) adds 320 MHz channels and multi-link operation. India opened part of the 6 GHz band for indoor use.
Tips to crack the IBM CCNA interview
Practise IBM's game-based cognitive assessments, which test pattern recognition, memory and numerical reasoning quickly.
Learn basics of hybrid cloud, Red Hat OpenShift and watsonx, which IBM promotes as core strategic areas.
Revise SQL, Python or Java fundamentals and be ready to explain one project in depth.
Keep a one-minute story ready for every project on your CV: problem, your part, tools, result.
Practise the hard questions on this page aloud; IBM interviewers usually ask follow-ups on your first answer.
Frequently asked questions
How many rounds are there in the IBM CCNA interview?
Candidates usually go through 4 stages: Online assessment (cognitive games + coding); English language test; Technical interview; Managerial or HR round. The exact rounds change with the role, team, location and your experience, so confirm the process with the recruiter.
Which topics should I prepare for the IBM CCNA interview?
This practice set leans on IP Addressing and Subnetting (7), Switching and VLANs (5), STP and EtherChannel (5), Routing and OSPF (4). Revise those first, then practise explaining one or two of your own projects end to end, because most IBM interviewers ask you to walk through real work.
Are these the exact questions asked at IBM?
No. These are curated practice questions that match the skills and difficulty usually tested in it services interviews like IBM's. They are not a leaked or verified list of past questions.
Where does IBM hire CCNA professionals in India?
IBM has large teams in Bengaluru, Pune, Hyderabad, Kolkata, Gurugram. Openings and locations change often, so check the IBM careers page and filter by city and experience.