Skip to content

Bug Life Cycle and Jira Interview Questions for Software Testing

46 Bug Life Cycle and Jira questions with answers for software testing roles — 10 easy, 30 medium, 6 hard.

About Bug Life Cycle and Jira

Covers defect states, severity and priority, writing strong bug reports, triage, defect metrics and daily use of Jira, including JQL, filters, dashboards and workflows. Interviewers test whether you can report a problem so developers act on it quickly and track it to closure.

Sheet progressStart practicing
3 QUESTIONS FREESign up to unlock the full question bank and track your progress.Unlock every question and answer, then continue practising company-wise and package-wise.
3 questions free Unlock the rest in seconds
01

Explain the bug life cycle.

Save to ▾
Show answer
New → Assigned → Open → Fixed → Retest → Verified → Closed, with Reopened, Rejected, Deferred and Duplicate as side paths.
02

Severity vs priority — with an example.

Save to ▾
Show answer
Severity = impact on the system. Priority = urgency to fix. Logo misspelt on the homepage → low severity, high priority. Crash in a rarely used report → high severity, low priority.
03

What makes a good bug report?

Save to ▾
Show answer
A clear title, steps to reproduce, expected vs actual result, environment/build, severity and priority, and evidence (screenshot, video, logs).
04

What is the difference between a Deferred bug and a Rejected bug?

Save to ▾
Show answer
A deferred bug is valid, but the team decides to fix it in a later release because of low priority, time limits or low impact. It stays in the backlog with a target version. A rejected bug is one the developer or triage team considers invalid: working as designed, not reproducible, a duplicate or caused by wrong test data. Testers should check the reason for rejection and challenge it with evidence if they disagree.
05

What is a duplicate bug and how do you avoid logging one?

Save to ▾
Show answer
A duplicate bug is a new report for a problem that is already logged. Before raising a bug, search the tracker by key words, module, error message and recent open bugs, and ask teammates working on the same area. If a similar bug exists, add your extra information, such as another browser or data set, as a comment instead of a new ticket. This keeps the backlog clean and saves triage time.
06

How does QA use Jira filters and dashboards?

Save to ▾
Show answer
Save filters for common views such as my open bugs, bugs ready for retest, blockers in the current sprint and bugs by fix version. Add them to a dashboard with gadgets like pie charts by priority, created versus resolved trend and a sprint bug list. Share the dashboard with the team so status is visible without manual reports. Testers start their day from the ready-for-retest filter.
07

What are components, labels and fix versions in Jira?

Save to ▾
Show answer
Components are fixed sub-parts of a project, such as Payments or Login, often with a default owner. Labels are free-text tags, such as regression or ui, that anyone can add for grouping. Fix version is the release in which the issue is planned to be fixed, while affects version is where the bug was found. Testers use these fields to filter bugs and to build release-wise reports.
08

A developer marks your bug as fixed, but it still fails. What do you do?

Save to ▾
Show answer
First confirm you are testing the right build, which contains the fix, and clear the cache. Repeat the exact steps and data from the bug. If it still fails, reopen the bug with a comment stating the build number, what you did and the actual result, with a fresh screenshot or video. Talk to the developer directly if the steps differ from what they tested, so the fix is not tested on a different scenario.
09

How do you explain a technical bug to a non-technical stakeholder?

Save to ▾
Show answer
Focus on impact, not internals. Say who is affected, what they cannot do, how often it happens and what it may cost, for example: 'About one in twenty users paying by UPI see a failure message even though money is debited, which will raise refund complaints.' Then give the options and a recommendation. Avoid jargon like null pointer or race condition unless asked. A short screen recording often helps.
10

What is a regression bug and how do you track it in Jira?

Save to ▾
Show answer
A regression bug is a feature that worked before but broke after a new change, such as login failing after a profile page update. It is usually treated with higher priority because it affects existing users. In Jira, add a label such as regression, set the affected version and link it to the story or change that caused it. Tracking these labels over time shows where regression coverage is weak.
11

How do you handle a bug found late in a release cycle?

Save to ▾
Show answer
Assess impact and risk, discuss with product and dev, decide to fix, defer with a workaround or delay release, and document the decision.
12

What is a hotfix?

Save to ▾
Show answer
An urgent patch released outside the normal schedule to fix a critical production defect, followed by regression testing and merge back to the main branch.
13

What are severity and priority? Give examples.

Save to ▾
Show answer
Severity is impact on the system; priority is urgency of the fix. A crash in a rare report is high severity, low priority; a spelling mistake in the logo is low severity, high priority.
14

What is JQL?

Save to ▾
Show answer
JIRA Query Language, used to search issues, for example project = ABC AND status = Open AND priority = High.
15

The developer says "it's not a bug". What do you do?

Save to ▾
Show answer
Re-check the requirement, reproduce with clear steps and evidence (screenshots, logs), discuss with the BA/PO and record the final decision.
16

How do you use JIRA in testing?

Save to ▾
Show answer
Log and track bugs, link them to stories, build dashboards and filters with JQL, manage sprints and generate reports.
17

What are the typical JIRA workflows for bugs?

Save to ▾
Show answer
Statuses like To Do, In Progress, In Review, Ready for QA, Done and Reopened, with transitions that depend on the team's configuration.
18

What is a bug triage meeting?

Save to ▾
Show answer
A regular review where QA, development and product assess new bugs and decide severity, priority, owner and target release.
19

What is defect leakage?

Save to ▾
Show answer
Defects found after release that testing should have caught; leakage % = defects in production / total defects x 100.
20

What is the difference between a bug and an enhancement?

Save to ▾
Show answer
A bug is behaviour that deviates from agreed requirements; an enhancement is a new or improved capability beyond the current requirements.
21

How do you write a good bug title?

Save to ▾
Show answer
State the problem, location and condition briefly, for example 'Checkout button disabled after applying a coupon on the cart page'.
22

What is the difference between a story, epic, task and bug in JIRA?

Save to ▾
Show answer
An epic is a large body of work; stories are user-facing slices of it; tasks are technical work items; bugs are defects.
23

What is a blocker bug?

Save to ▾
Show answer
A defect that stops testing or release of a feature because no workaround exists, so it is highest priority.
24

What is defect density?

Save to ▾
Show answer
The number of defects per size of software, for example defects per thousand lines of code or per module, used to compare quality.
25

A bug is not reproducible. What next?

Save to ▾
Show answer
Re-check environment, data, browser and steps; check the logs; try the reporter's setup; add video and console logs; mark it 'cannot reproduce' only after discussing with the developer, and keep monitoring.
26

What is root cause analysis for defects?

Save to ▾
Show answer
Finding why a defect was introduced, such as unclear requirements or missed reviews, to prevent similar defects in future.
27

When should you reopen a bug and when should you log a new one?

Save to ▾
Show answer
Reopen the bug when the same issue, with the same steps and expected result, still fails after the fix. Log a new bug when the fix works but a different problem appears, even in the same screen, or when the original bug has already been closed in a past release. Link the new bug to the old one. Mixing different problems in one reopened ticket confuses tracking and metrics.
28

Write a JQL query for open high or highest priority bugs in the current sprint of project PAY.

Save to ▾
Show answer
project = PAY AND issuetype = Bug AND statusCategory != Done AND priority in (Highest, High) AND sprint in openSprints() ORDER BY priority DESC, created ASC
29

What is defect age?

Save to ▾
Show answer
Defect age is how long a defect stays open, measured either in time, from the date it was logged to the date it was closed, or in phases, from the phase where it was introduced to the phase where it was found. High defect age signals slow fixing or triage. Phase-based age shows how late defects are caught; a requirement defect found in UAT has a high age and is costly.
30

What is defect removal efficiency?

Save to ▾
Show answer
Defect removal efficiency shows how many defects the team found before release. DRE = defects found before release divided by (defects found before release plus defects found after release), multiplied by 100. If QA found 90 bugs and users reported 10, DRE is 90 percent. A falling DRE means testing is missing more defects, and the escaped bugs should be analysed to improve test coverage.
31

How do you link stories, test cases and bugs in Jira for traceability?

Save to ▾
Show answer
Create test cases as linked issues or in a test management add-on and link each one to its story with a tests relationship. When a test fails, create the bug from the test execution or link it to both the test and the story with is blocked by or relates to. Use the same fix version for all. A story then shows its tests and open bugs, which makes sign-off and the traceability report easy.
32

What does Won't Fix mean and who decides it?

Save to ▾
Show answer
Won't Fix means the bug is acknowledged as real, but the team decides not to fix it, usually because the impact is very low, the feature is being retired or the cost of fixing is higher than the benefit. The decision is made by the product owner, often in triage with dev and QA leads. The tester should make sure the reason is recorded and, if user-facing, documented as a known issue.
33

How do you write steps to reproduce for a bug that needs specific test data?

Save to ▾
Show answer
Start with preconditions: environment, build number, user role and the exact data state, such as an account with two pending orders and zero wallet balance. Mention how to create the data or give the test account ID. Then list numbered steps with exact inputs and finish with expected and actual results. If the data is hard to set up, attach the SQL used or a database screenshot so the developer can recreate it quickly.
34

What is the difference between a known issue and an open bug at release time?

Save to ▾
Show answer
An open bug is any defect not yet resolved. A known issue is an open bug that the team has consciously agreed to release with, after assessing its impact, and has documented in release notes or support notes, often with a workaround. Every known issue is an open bug, but not every open bug should ship. QA makes sure known issues are listed and approved by the product owner.
35

How do you handle pressure when many bugs are found close to a release?

Save to ▾
Show answer
Model answer: Situation: two days before a release, we found 15 new bugs in checkout. Task: help the team decide what to fix. Action: I stayed calm, retested each one quickly, ranked them by user impact, and shared a clear list in triage with must-fix and can-wait items. Result: we fixed five critical bugs, released on time with documented known issues, and no critical issue reached users.
36

What is the difference between a defect and a production incident?

Save to ▾
Show answer
A defect is a flaw in the software that makes it behave differently from the requirement, whether found in testing or production. A production incident is an event that disrupts or degrades service for users, such as an outage or a failed payment flow. An incident may be caused by a defect, but also by infrastructure, configuration or third-party failures. Incidents are handled by an incident process first, then linked to defects for the fix.
37

Tell me about a disagreement with a developer about a bug's severity.

Save to ▾
Show answer
Model answer: Situation: I logged a bug where the invoice PDF showed the wrong GST number, and the developer marked it minor because the screen value was correct. Task: get the right priority. Action: I explained that customers use the PDF for tax filing and showed the requirement. Result: the product owner agreed it was major, it was fixed before release, and we added PDF checks to regression.
38

Describe a time you missed a bug that reached production.

Save to ▾
Show answer
Model answer: Situation: a discount was applied twice when users pressed the pay button quickly. Task: I had tested the feature and missed it. Action: I owned it in the retrospective, helped reproduce and verify the fix, and added double-click and slow network cases to our checklist for all payment buttons. Result: similar issues were caught in later sprints, and I learned to always test repeated actions.
39

What is a bug bash and how do you run one?

Save to ▾
Show answer
A bug bash is a short, time-boxed session where people from across the team, including developers, product and support, test the product together to find as many issues as possible before a release. To run one, share a build, scope and test accounts, assign focus areas, give a simple bug template and a shared board, then triage findings at the end. It brings fresh eyes and finds usability issues formal tests miss.
40

Tell me about a time you organised or ran a bug bash before a release.

Save to ▾
Show answer
Situation: a new seller onboarding flow was due in a week and only two testers had seen it. Task: I wanted wider coverage quickly. Action: I set up a one-hour bug bash with developers, product and support, shared test accounts, focus areas and a simple bug form, then triaged findings with the lead. Result: we found 18 issues, including two blockers on low-end phones, and fixed them before launch.
41

Production has a critical bug. What are your steps?

Save to ▾
Show answer
Reproduce and assess impact, inform stakeholders, help developers fix and verify in staging, run regression and check monitoring after the hotfix, then do a post-mortem.
42

A bug happens only in production and not in the QA environment. How do you investigate?

Save to ▾
Show answer
Collect exact details: user, time, device, browser and request IDs. Compare production with QA for configuration, feature flags, data volume, third-party integrations, versions and caching. Ask for production logs and error traces through the support or dev team. Try to reproduce in QA with production-like data or in a staging environment. Once found, add a test for the gap and fix the environment difference if one caused it.
43

The same bug keeps reopening across three sprints. What do you do?

Save to ▾
Show answer
Stop the retest loop and call a short session with the developer, lead and product owner. Check whether the fix addresses the root cause or only the symptom, whether everyone agrees on the expected behaviour and whether different environments or data are involved. Run a root cause analysis and agree on clear acceptance tests before the next fix. Add an automated regression check so it cannot silently return.
44

Your backlog has 200 low-priority bugs and it is becoming unmanageable. How do you handle it?

Save to ▾
Show answer
Run a backlog grooming session with the product owner. Close bugs that are obsolete, no longer reproducible or for retired features. Merge duplicates. Group the rest by module and user impact, and ask whether a few related bugs can be fixed together as one story. Agree to reserve a small share of each sprint for bug fixes. Set an ageing rule, for example review any bug older than 90 days.
45

What is defect prevention and what practical techniques does a QA team use?

Save to ▾
Show answer
Defect prevention focuses on stopping defects from being introduced instead of only finding them. Practical techniques include requirement reviews and clear acceptance criteria, Three Amigos sessions, design and code reviews, unit testing standards, coding checklists from past bugs, root cause analysis of escaped defects, and training on common mistakes. Track whether repeated defect types fall over time to prove the effort works.
46

Leadership asks for a one-page quality update before a release. Which bug metrics do you report?

Save to ▾
Show answer
Keep it short and decision-oriented. Show open bugs by severity, the created versus resolved trend, blockers with owners and dates, defect leakage from the last release and modules with the most defects. Give a clear recommendation, such as ready, ready with known issues or not ready, with reasons. Use a shared dashboard for detail, and one slide or email summary for leaders who need only the risk picture.

Frequently asked questions

How important is Bug Life Cycle and Jira in Software Testing interviews?

Covers defect states, severity and priority, writing strong bug reports, triage, defect metrics and daily use of Jira, including JQL, filters, dashboards and workflows. Interviewers test whether you can report a problem so developers act on it quickly and track it to closure.

How should I use the Bug Life Cycle and Jira sheet?

Go top to bottom — easy to hard. Answer before opening each answer, tick what you solved and save misses to Last-Minute Revision.