Skip to content

Manual Testing Basics Interview Questions for Software Testing

37 Manual Testing Basics questions with answers for software testing roles — 18 easy, 17 medium, 2 hard.

About Manual Testing Basics

Covers what testing is, QA versus QC, verification and validation, the seven testing principles, SDLC models and static versus dynamic testing. Interviewers use these questions to check that a fresher understands why testing exists and can explain core terms clearly before moving to test design and tools.

Sheet progressStart practicing
3 QUESTIONS FREESign up to unlock the full question bank and track your progress.Unlock every question and answer, then continue practising company-wise and package-wise.
3 questions free Unlock the rest in seconds
01

Verification vs validation?

Save to ▾
Show answer
Verification: are we building the product right? (reviews, walkthroughs — no code run). Validation: are we building the right product? (actual testing against user needs).
02

Smoke vs sanity testing?

Save to ▾
Show answer
Smoke testing checks that the critical features of a new build work (broad and shallow). Sanity testing checks that a specific fix or area works after a change (narrow and deep).
03

What is software testing and why is it needed?

Save to ▾
Show answer
Evaluating software to find defects and confirm it meets requirements. It reduces risk, protects users and saves the cost of fixing bugs after release.
04

What is the difference between a test case and a test scenario?

Save to ▾
Show answer
A scenario is a high-level thing to test (user logs in); test cases are the detailed steps and data that verify it.
05

What is a test case and its components?

Save to ▾
Show answer
A set of steps with inputs and expected results. Components: ID, title, preconditions, steps, test data, expected result, actual result and status.
06

Difference between black box, white box and grey box testing?

Save to ▾
Show answer
Black box tests behaviour without code knowledge; white box tests internal logic and paths; grey box uses partial knowledge of the internals.
07

What is the difference between an error, a defect and a failure?

Save to ▾
Show answer
A human error causes a defect in the code, and when that defect is executed it produces a failure visible to users.
08

What is the difference between quality assurance and quality control?

Save to ▾
Show answer
Quality assurance is process-oriented and preventive: it sets standards, reviews and checklists so defects are not introduced in the first place. Quality control is product-oriented and detective: it checks the actual build through testing and inspection to find defects. For example, introducing a requirement review checklist is QA, while executing test cases on a release build is QC. Software testing is one activity inside quality control.
09

Why is exhaustive testing impossible?

Save to ▾
Show answer
Exhaustive testing means trying every possible input, path and combination, which is practically infinite for real software. Even a single text field accepting 20 characters has more combinations than you could ever run. So testers use risk and techniques like equivalence partitioning and boundary value analysis to select a small set of tests that give high confidence. The goal is enough coverage of important risks, not every possible case.
10

What is the role of a manual tester in a software team?

Save to ▾
Show answer
A manual tester understands requirements, writes test scenarios and test cases, prepares test data, executes tests on each build, logs clear bug reports and retests fixes. They also do exploratory testing, join stand-ups and reviews, and give a quality status before release. Beyond finding bugs, a good manual tester represents the end user and raises usability or requirement gaps early, when they are cheap to fix.
11

What does quality mean to you as a tester?

Save to ▾
Show answer
Model answer: To me quality means the product does what users need, reliably, and is easy to use, not just that test cases pass. In my final-year project I tested a library app; all features worked, but students struggled to find the search option. I reported it as a usability issue and the team moved search to the home screen. That taught me to test from the user's point of view as well.
12

What is the difference between a build and a release?

Save to ▾
Show answer
A build is a compiled version of the software created from the latest code, often many times a day, and given to QA for testing. A release is a tested, approved version delivered to customers or production, usually with release notes and a version number. Many builds can go through testing before one of them is promoted as a release. Testers always note the build number in bug reports.
13

What is the waterfall model and where does testing fit in it?

Save to ▾
Show answer
Waterfall is a sequential model: requirements, design, development, testing and deployment happen one after another. Testing starts only after development is complete, so defects in requirements or design are found late and are costly to fix. It suits small projects with stable, well-defined requirements. Its weakness for testers is the late feedback, which is why most teams now use Agile or the V-model.
14

When is manual testing a better choice than automation?

Save to ▾
Show answer
Manual testing is better for exploratory testing, usability and look-and-feel checks, features that change often, one-time tests and early testing of new functionality. Automation pays off for stable, repetitive tests such as regression suites, data-driven checks and smoke tests run on every build. Most teams combine both: manual for discovery and judgement, automation for speed and repeatability.
15

You receive a new build and the login page itself is broken. What do you do?

Save to ▾
Show answer
Login is a blocker because no other testing can proceed. Confirm it quickly: retry with valid test accounts, check another browser and confirm the right environment and build number. Then log a blocker bug with steps, screenshot and console or network errors, inform the developer and lead immediately, and mark the build as rejected in smoke testing. Meanwhile, prepare test data or review test cases until a fixed build arrives.
16

Why do you want to start your career in manual testing?

Save to ▾
Show answer
Model answer: I enjoy finding how things break and thinking like a user. During my internship I tested a college fee portal and found that a refund was shown twice on the receipt, which the team fixed before launch. Manual testing gives me a strong base in requirements, test design and bug reporting. I plan to add SQL, API and automation skills on top of it as I grow.
17

What is a test basis?

Save to ▾
Show answer
The test basis is the set of documents and knowledge from which test cases are derived. It includes requirement specifications, user stories with acceptance criteria, design documents, wireframes, API contracts, business rules and even existing system behaviour. A good test basis lets you trace each test case back to a requirement. If the test basis is weak or missing, testers must clarify it before or while testing.
18

What is a test harness?

Save to ▾
Show answer
A test harness is the setup of drivers, stubs, test data, scripts and tools needed to run tests on a component and collect results, especially when the full system is not available. For example, to test a pricing module, a harness can feed it input files, stub the tax service and compare outputs with expected values. In automation, the framework, runner and reporting together are often called the harness.
19

What is defect clustering?

Save to ▾
Show answer
The observation that a small number of modules contain most defects, so testing should focus on those areas.
20

What is the V-model?

Save to ▾
Show answer
A development model where each development phase has a matching testing phase, such as requirements with acceptance tests and design with integration tests.
21

What is the difference between static and dynamic testing?

Save to ▾
Show answer
Static testing reviews documents and code without executing; dynamic testing executes the software to observe behaviour.
22

What are the seven principles of testing?

Save to ▾
Show answer
Testing shows presence of defects, exhaustive testing is impossible, test early, defects cluster, the pesticide paradox, testing is context-dependent and absence-of-errors is a fallacy.
23

What is the pesticide paradox and how do you counter it?

Save to ▾
Show answer
The pesticide paradox says that if you run the same tests again and again, they stop finding new defects, just as pests become resistant to the same pesticide. To counter it, regularly review and update test cases, add new scenarios from recent production bugs, vary test data, and mix scripted runs with exploratory sessions. Rotating testers across modules also brings fresh eyes and new ideas.
24

What does the absence-of-errors fallacy mean?

Save to ▾
Show answer
It means that finding and fixing many defects does not guarantee success if the system itself does not meet user needs. A bug-free product built on wrong or misunderstood requirements is still a failure. For example, a perfectly working report that shows the wrong business metric is useless to the client. This is why testers validate against real user expectations, not just the written specification.
25

What is shift-left testing and why is it cheaper?

Save to ▾
Show answer
Shift-left means starting testing activities earlier in the life cycle: reviewing requirements, joining design discussions and writing tests before code is complete. A defect found in requirements may cost a short conversation to fix, while the same defect found in production may need a hotfix, data correction and customer support. Testers shift left by asking questions in grooming, defining acceptance criteria and reviewing designs.
26

What do testers look for during a requirement review?

Save to ▾
Show answer
Check that each requirement is clear, complete, consistent and testable. Look for vague words like fast or user-friendly, missing error handling, undefined limits, conflicting rules and missing roles or states. For each requirement ask how you would test it and what the expected result is. Record questions in a review log and get answers from the business analyst before writing test cases, so ambiguity does not turn into defects later.
27

What is a test oracle?

Save to ▾
Show answer
A test oracle is the source you use to decide whether a test result is correct, that is, the expected result. It can be a requirement document, a user story, an older version of the system, a calculation in a spreadsheet, a domain expert or common sense. For example, when testing a tax calculator, the official tax slab table is the oracle. Without a reliable oracle, you cannot say a test passed or failed.
28

What is the difference between a walkthrough and an inspection?

Save to ▾
Show answer
Both are static review techniques. A walkthrough is informal and led by the author, who explains the document or code to peers to share knowledge and gather feedback. An inspection is the most formal review: it has defined roles such as moderator, reader and scribe, uses checklists, needs preparation and records defects and metrics. Inspections find more defects but take more effort.
29

A developer asks you to test a feature that has no acceptance criteria. How do you proceed?

Save to ▾
Show answer
First ask the product owner or business analyst for the expected behaviour and write down the answers as draft acceptance criteria. Meanwhile, explore the feature, compare it with similar existing features and list assumptions. Share the assumptions in the story so everyone agrees before you sign off. Raise the missing criteria in the next refinement so future stories are not picked up without them.
30

A feature passed all your test cases, but users say it is confusing. What went wrong?

Save to ▾
Show answer
The tests verified the specification but did not validate the user experience. The test cases probably checked only functional outcomes and missed usability: unclear labels, too many steps or poor error messages. Next time, add usability heuristics to reviews, do exploratory sessions as a real user persona and involve users in UAT or demos. Log the current feedback as improvement items with clear examples.
31

How would you test a web page you have never seen before in 30 minutes?

Save to ▾
Show answer
Spend five minutes understanding its purpose and main user flows. Then run a quick smoke check of the main flow end to end, test key inputs with valid, invalid and boundary values, check links, buttons and error messages, and try the page on a second browser and a mobile width. Keep short notes and take screenshots as you go. Report the top issues by risk at the end, not every small cosmetic point.
32

How do you break a requirement into testable conditions?

Save to ▾
Show answer
Read the requirement and identify inputs, outputs, business rules, user roles and states. Turn each rule into a condition with an expected result, then add negative and boundary conditions. For example, 'users can withdraw up to 10,000 per day' becomes: withdraw below the limit, exactly at the limit, above the limit, multiple withdrawals adding up to the limit, and the limit resetting the next day. Each condition then becomes one or more test cases.
33

Tell me about a time you found an important bug that others missed.

Save to ▾
Show answer
Model answer: Situation: before a release of an insurance app, all regression tests had passed. Task: I was doing a final exploratory round. Action: I renewed a policy on the last day of the month and saw that the premium was calculated for 31 days in a 30-day month. I logged it with exact data and the formula difference. Result: the date logic was fixed before release, and I added month-end cases to the suite.
34

What are latent defects and masked defects?

Save to ▾
Show answer
A latent defect exists in the software but has not caused a failure yet because the needed conditions have not occurred, such as a leap-year bug that appears only on 29 February. A masked defect is hidden by another defect, for example a broken discount calculation you cannot reach because the cart page crashes first. After the first bug is fixed, the masked one appears, which is one reason regression and retesting matter.
35

Why should we hire you as a manual tester over someone with more automation experience?

Save to ▾
Show answer
Answer with strengths and honesty. For example: I am strong at understanding requirements, designing test cases with techniques like boundary values and finding bugs through exploratory testing, which automation depends on to be useful. I also write SQL and test APIs in Postman. I am learning Playwright and have automated a few smoke tests, so I can grow into automation while adding value from the first week.
36

How do you test an application with no documentation?

Save to ▾
Show answer
Talk to developers and users, explore the product, review similar systems, create notes and mind maps, confirm assumptions and write test cases as you learn.
37

A manager wants to cut QA time in half. How do you explain the value of testing?

Save to ▾
Show answer
Use data, not opinion. Show defects caught before release by severity, production incidents and their cost, and defect leakage trends. Explain what risk increases if testing is cut, then offer options: risk-based testing of critical flows, more automation for regression, and developers owning unit tests. Agree on which risks the business accepts in writing. This turns the discussion into a trade-off decision instead of a conflict.

Frequently asked questions

How important is Manual Testing Basics in Software Testing interviews?

Covers what testing is, QA versus QC, verification and validation, the seven testing principles, SDLC models and static versus dynamic testing. Interviewers use these questions to check that a fresher understands why testing exists and can explain core terms clearly before moving to test design and tools.

How should I use the Manual Testing Basics sheet?

Go top to bottom — easy to hard. Answer before opening each answer, tick what you solved and save misses to Last-Minute Revision.